V1.5 - Oval

Vivid Audio

SKU:
Oval V-1.5SE

Description

While being two-way systems the V1 range of loudspeakers maintain the Vivid philosophy of pistonic operation throughout the frequency spectrum. Available in two sizes, the smaller V1 w, V1h and V1s are best suited to mounting near to boundaries such as wall or desktop use while the larger V1.5 pedestal mount will sit quite happily well away from the walls.

The K1 floor-standing model is the largest of the range employing the coupled front and back bass driver system and integral stand.

K1 employs a single D50 mid range driver, between 900Hz and 4kHz with the range beyound being handled by a D26 tweeter. Below 900Hz the K1 uses four C125 midbass drivers, two mounted on the front baffle and two mounted on the rear baffle of the cabinet. These four drivers are internally coupled in pairs via screw tensioning units for reaction cancelling. Through the use of innovative crossover circuity, all drivers receive the same signal at frequencies below 100Hz while above this point drive to the lower and rear drivers is progressively attenuated leaving only the front upper driver to operate all the way to 900Hz to ensure good vertical dispersion at crossover.
 
Fourth order filters ensure phase coherence through both main crossover points resulting in a seamless and symmetrical polar performance. Integral to the K1 enclosure is the stand, made from the same cast carbon fibre reinforced polyester compound as the enclosure, the stand provides an exceptionally stable footing further guaranteed by the use of a total of five spikes mounted around the periphery of the base. Adjustment of the two rear spikes and that at the front sets the correct attitude while the remaining two can then be brought into contact with the floor for maximum safety.
 
Within each of the streamlined arms are hidden separate conduits to guide the Van den Hul® interconnectioning cable away from the two internally mounted crossovers into the base. Precision machined gold plated terminals are disretely located at the rear of the base to allow a visually unobtrusive connection to the outside world.

Extra Information

Brand:
Vivid Audio


Specifications

Configuration 2 way vented cabinet
Cabinet material Complex loaded carbon fibre filled polymer
Cabinet colour Piano Black, Pearl White
Bespoke colour
Drive units HF: D26 – 26mm metal dome unit with tapered tube loading MF / LF: C125 – 1 x 125mm metal coned unit
Sensitivity 89dB @ 2.83VRMS at 1m on axis
Nominal impedance (Ω) 8
Frequency range (Hz) 40 – 33,000 Hz (-6dB)
Frequency response (Hz) 42 – 30,000 Hz +/- 2dB on reference axis
First D26 Break Up mode: 44,000 Hz
Harmonic distortion (2nd and 3rd harmonics) < 0.5% over frequency range
Cross over frequencies (Hz) 3,000
Power handling rms 150W
Loudspeaker dimensions 1,130mm (H) x 255mm (W) x 240mm (D)