Description
NGSME8F2xu
The NGSME8F2xu switch is 8-port 100M/1G/2.5G Base-T + 2-port 1G/2.5G/10G SFP+Open Slot Rack-mount L2+ Full
Management Network Switch that is designed for medium or large network environment to
strengthen its network connection. The switch supports 80G non-blocking switch fabric, its eight
2.5G ports and two 10G ports can transmit and receive data traffic without any lost. The EEE
feature reduces the power consumption when there is no traffic forwarding even port is still
connected. The 10G uplink port design is available and important for high bandwidth uplink
request when cascaded with other switch. The switch also supports Layer 2/3 full management
software features. These features are powerful to provide network control, management,
monitor and security feature requests. With rack-mount brackets, the 19” size fits into your rack
environment. It is a superb choice to boost your network with better performance and
efficiency.
IEEE 802.3at/af/bt Power over Ethernet (PoE) Ports
This product can convert standard 100~240V/AC power into low-voltage DC that runs over
existing LAN cable to power up IEEE 802.3at/af/bt compliant network accessories. It also
features PoE awareness to verify whether the network device receive power is IEEE 802.3at/af/bt
compliant, or only the data will be sent through LAN cable. By adding the switch to the existing
networking, installing networking products such as Access Points and IP cameras can be easily
managed and set up. Wireless device deployments are easily located with available power
outlets and network administrators don’t need to use heavy AC power adapters anymore.
IEEE 802.3bz NBASE-T 2.5G Ports
Based on the existing Gigabit Ethernet and 10 Gigabit Ethernet standards, all 8 of NGSME8F2xu’s
RJ45 ports’ transmitting speed can reach 2.5G with CAT-5E cables, far exceeding the 1 Gigabit
transmitting speed that is common seen in other switches.
2 10 Gigabit SFP+ Open Slots
The switch equips with 2 10G SFP+ open slots as the uplink ports, the 10G uplink design provides
an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product
provides high flexibility and high bandwidth connectivity to another 10G switch or the Servers,
Workstations and other attached devices which support 10G interface. The user can also
aggregate the 10G ports as Trunk group to enlarge the bandwidth.
Full Layer 2/3 Management Features
The switch includes full Layer 2/3 Management features. The software set includes up to 4K
802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There
are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol
to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree,
LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It
also provides Console CLI for out of band management and SNMP, Web GUI for in band
Management.
Advanced Security
The switch supports advanced security features. For switch management, there are secured
HTTPS and SSH, the login password, configuration packets are secured. The port binding allows
