Description
NGSME48T4H
The switch is 48-port 10 Base-T /100 Base-TX /1000Base-T + 4 x 10 Gigabit SFP+ Ports Rack-mount
L2+ Full Management Network
Switch that is designed for medium or large network environment to strengthen its network
connection. The switch supports 176G non-blocking switch fabric, the 48 gigabit ports and 4
uplink 10G ports can transmit and receive data traffic without any lost. The EEE feature reduces
the power consumption when there is no traffic forwarding even port is still connected. The
switch also supports Layer 2+ full management software features. These features are powerful
to provide network control, management, monitor and security feature requests. Including rackmount brackets, the 19" size fits into your rack environment. It is a superb choice to boost your
network with better performance and efficiency.
4 10-Gigabit SFP Open Slots
The switch equips with 4x 10G SFP+ open slots as the uplink ports, the 10G uplink design provides
an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product
provides high flexibility and high bandwidth connectivity to another 10G switch or the Servers,
Workstations and other attached devices which support 10G interfaces. The user can also
aggregate the 10G ports as Trunk group to enlarge the bandwidth.
Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K
802.1Q VLAN and advanced Protocol VLAN, Private VLAN, MVR…advanced VLAN features. There
are 8 physical queues Quality of Service, IPv4/v6 Multicast filtering, Rapid Spanning Tree protocol
to avoid network loop, Multiple Spanning Tree Protocol to integrate VLAN and Spanning Tree,
LACP, LLDP; sFlow, port mirroring, cable diagnostic and advanced Network Security features. It
also provides Console CLI for out of band management and SNMP, Web GUI for in band
Management.
Designed for Video-over-IP applications
The switch management Layer 3 functionality has
been optimized for use with Video over IP
applications. Easy to configure and with a nonblocking architecture. With the total of 40Gb
uplinks/virtual stacking ports per switch, Video
over IP designs of up to 2300 end points can be
supported.
Advanced Security
The switch supports advanced security features. For switch management, there are secured
HTTPS and SSH, the login password, configuration packets are secured. The port binding allows
to bind specific MAC address to the port, only the MAC has the privilege to access the network.
The 802.1X port based Access Control, every user should be authorized first when they want to
access the network. AAA is the short of the Authentication, Authorization and Accounting with
RADIUS, TACAS+ server. Layer 2+ Access Control List allows user to define the access privilege
based on IP, MAC, Port number…etc.
IEEE 802.3at Power over Ethernet (PoE) ports
This product can convert standard 100~240V/AC power into low-voltage DC that runs
over existing LAN cable to power up IEEE
802.3at/af compliant network accessories. It also features PoE awareness to verify
whether the network device receive power is IEEE
802.3at/af compliant, or only the data will be sent through LAN cable. By adding the
switch to the existing networking, installing networking products such as Access Points
and IP cameras can be easily managed and set up.
PD Monitoring: Self-healing Intelligent PoE ports
When this function is enabled, the NGSME48T4H will detect a network PoE powered
device (for example, an IP CAM) with a set of IP address periodically. If the switch
doesn’t get any replies from the network PoE powered device, NGSME48T4H will do a
power cycle (PoE power OFF, and PoE power ON) to the port that connects the network
PoE powered device, allowing that device to reboot. You can set the frequency of
detecting, number of times of detecting, and the time period to perform power cycle
when there’s no reply via the switch’s PoE configuration web page.
